Matters needing attention during the process of electrostatic coating

1 spray voltage
1.1 Within a certain range, the spraying voltage increases and the amount of powder adhesion increases, but when the voltage exceeds 90KV, the amount of powder adhesion decreases with the increase of voltage.
1.2 When the voltage increases, the initial growth rate of the powder layer increases, but as the spraying time increases, the influence of the voltage on the thickness increase rate of the powder layer becomes smaller.
1.3 When the spray distance (the distance from the spray head to the surface of the workpiece) increases, the effect of the voltage on the thickness of the powder layer becomes smaller. The general distance should be between 150-300mm.
1.4 If the spraying voltage is too high, the powder layer will break down and affect the coating quality. Spray voltage should be controlled between 60-90KV
2 The powder supply pressure refers to the air pressure of the powder feed pipe in the powder feeder. Under other conditions, 0.05MPa (1.96 kg force) is the best.
3 The amount of powder sprayed refers to the amount of powder discharged from the gun mouth per unit time. The initial growth rate of the thickness of the powder layer is proportional to the amount of powder sprayed. However, as the spraying time increases, the effect of the amount of powder on the growth rate of the thickness of the layer is not only small, but also the deposition efficiency is reduced. 100-200g/min is more suitable.
4 Spray distance The spray distance refers to the distance from the spray gun to the surface of the workpiece. When the electrostatic voltage applied by the spray gun is constant and the spray distance changes, the electric field strength will also change. Therefore, the size of the spray distance directly affects the thickness of the powder layer and the deposition efficiency of the workpiece. The best distance is about 250mm.

5V Switching Wall Charger

5V Switching Wall Charger Power Adapter for Home Electronics

5V Switching wall charger


Micro USB:
Original back-and-white display Kindle 1st Gen, Kindle Fire Kindle HD Fire HD 6 8 10 HDX 7 8.9 9.7, Samsung Galaxy S7/Edge, S6/Edge, S5, S4, S3, S2, Si9003, S5820, N7100, Note3, Note4

5.5mm x 2.1mm:
For Bluetooth speakers/ Electronic Toys/ Mini Fan/ Portable Air Conditioner/ LED Pixel Light/ Monitor/ Camera/ Webcam Router/ Cable Modem/ USB-HUB/ photo player/ SCM development/ access control attendance ect.

4.0mm x 1.7mm:
For mp3 mp4 speaker CCTV camera power supply connection/ digital picture frame/ shower Christmas lights/ Sabrent USB HUB/ digital recorder ect.

3.5mm x 1.35mm:
* For Facial Cleansing Brush: Foreo Luna 3/ Luna 3 Plus/ Luna/ Luna2/ Luna Mini/ Luna Mini 2/ Luna Go/ Luna Luxe, ISSA Series E-Toothbrush ISSA / ISSA Hybrid / ISSA mini / ISSA Mikro / ISSA play, ESPADA Acne Treatment Device, IRIS Eye Massager

* For Fairywill Sonic Electric Toothbrush FWP11 FW507 FWD1 FWD3 FWD8 FW917 FW2001 FWE11 FWE11 FW917 FWT9 ect.

* For LELO Ida, Lyla, Lyla 2, Oden, Oden 2, Ora, Ora 2, Tara, Alia, Isla, Soraya, Inez, Yva, Mia, Mia 2, Nea, Nea 2, Lily, Lily 2, Liv, Liv 2, Gigi, Gigi 2.

* For LELO Mona, Mona 2, Mona Wave, Ina, Ina 2, Ina Wave, Siri, Siri 2, Iris, Elise, Elise 2, Billy, Tor, Tor 2, Bo, Hugo, Bruno, Hula Beads, Loki, Loki Wave.

5v wall charger,5v 2a wall charger,5v 3a wall charger,5v power charger,switching 5v charger,5v 1a Wall Wart Transformer Charger,5v 2a Wall Wart Transformer Charger,5v 3a Wall Wart Transformer Charger,5V 2A/2000mah AC Power Adapter Adaptor Wall Charge

Shenzhen Waweis Technology Co., Ltd. , https://www.waweis.com