What is more worth looking forward to before the Lunar New Year in 2018 is coming soon! The annual value-for-money welfare feedback gives you one year's worth of Dabo Welfare once. Click here to learn more
The first draft was given by Xiao Bian, saying that the quality of the picture was too bad, and that I was too excited to get the machine at that time. I took the phone and shot it. Now I had to rework it, and I removed the power amplifier and took it down with a camera. In addition to the group photos, some texts are also added. I hope everyone can enjoy them. .
The renovation of the new house has been completed, and their home audiovisual infrastructure is also basically shaped. The worst piece of the final piece is the amplifier. After a selection of the amplifier, the Onkyo 676E was finally selected. It finally arrived yesterday, and after a few tortuous attempts, it was finally completed. Dolby's test dish, the effect of the panoramic sound is really cool, a little bit of excitement, come and share with everyone.
In the initial conception, I was planning to go on the Marantz 6011. First, I used the old Marantz. I feel that the effect is good. Especially watching the concert, I still have deep feelings for Marantz, and the second is 6011. The cheapest 5.1.4 amplifier, the formation of the system more convenient. But at the end of the renovation, the budget has been severely overspent. Although the current 6011 has fallen below 6,000, it still feels a bit expensive for me. At last, I chose the Onkyo 676E to support the panoramic sound, DTSX, HDR10, and Du. Compared with many other latest technologies such as the field of vision, the key price is not expensive. The Hong Kong Bank's price of 3700 is regarded as the most cost-effective panoramic sound amplifier at present, and the price can still be accepted. However, the initial 5.1.4 cannot be realized, only 5.1.2. The reflector box that was originally purchased was also idle, but in the final analysis it was still poor.
The packaging was still very structured, and it also hit a wooden stand with a high transport safety factor.
The 676E's outer box, as a low-end machine, is also light in weight. One can easily handle it, and those high-end machines often require two people to get it.
After opening the box, you can see that the protection of the machine is still very good.
According to the front view, we can see that the 676E continues the style of Onkyo. The front panel is still very simple and there are not too many complex buttons.
Onkyo's logo, below is the switch button.
Listening mode and high and low bass select buttons and knobs.
The display panel and sound source switching buttons also have a good touch.
Test with wheat and AUX INPUT input interface, there is a front HDMI, but there is no front USB, it is very convenient to use, here if you add a USB will be much better.
The back interface, Onkyo and Pioneer merged, the biggest change is the speaker interface moved to the center, we can see the 676E supports 7-channel output and ZONE2 partition output, HDMI 6 into 2 out, for the average home One projector is enough for a television.
At the top of the function logo, you can see Dolby Panorama, DTSX, and Dolby Vision. These are all new features. This is one of the reasons I fancy the 676e.
676e transformer, as an entry-level product, 676E provides 165W per channel power, but Japanese products, this indicator to see on the line, the actual thrust is still relatively weak, but my speaker is still a good push.
Since it is a Hong Kong bank, it is a British standard plug, and everyone needs to have an adapter.
Family portrait, random delivery AM, FM antenna, running AccuEQ microphone and remote control.
After removing the packaging, the next step is to connect the speaker cable. For users who use the banana head, you will find that the plug is not inserted and the hole is too small.
I just had to remove my head and twist it.
Waiting for me for nearly an hour. After the demolition of the head was completed, the friends in the group told me that there was a protective cover on the socket and I could plug it in. I was extremely depressed, ah, ah,,
Also remove the speaker cable and put on the head, pull down the protective cover, the final effect, the top of the head is better than the twist line.
Finally plug in the HDMI cable, remember that you must not hot plug HDMI, otherwise it is easy to burn the interface, after connecting all the cables look like.
After the installation is completed, it is placed in the rack and ready for debugging.
The tripod on the shelf was placed in the central position, and the height was adjusted to our sitting height. The microphone was mounted and the AccuEQ was ready to run. Here, the Onkyo's room acoustics automatic calibration system was used. Previously, Onkyo used the Odyssey, but in 14 years. After that, I moved into my own AccuEQ. As far as I'm concerned, AccuEQ is not as accurate as the Odyssey.
We first need to set the speaker channels. Everyone chooses according to their layout. Mys is 5.1.2.
Then you can start running, the test process is fully automatic, pay attention to keep quiet.
The test will adjust the speaker's crossover frequency, distance, and gain of each channel based on the results.
But sometimes the result is incorrect. For example, my right front position measured here is only 0.96m. At this time, we need to manually adjust it.
Use a tape measure to actually measure the distance.
This is the level after I finished AccuEQ. Generally speaking, it should be about the same as it should be. In fact, I think that the sound pressure of the test is more accurate. The sound pressure from each sounding point to the listening position should be the same. For this reason, I used a Taiwanese sound pressure meter to make manual adjustments for a friend.
Sound pressure meter, this is one of my most important weapons.
First of all, we press the menu button to enter the settings of Onkyo, you can see that the options are still relatively more, but Onkyo's instructions are written more shallowly, many have to explore for themselves.
We have manually adjusted more of the fairly loud speaker settings
This is the result of the last time AccuEQ was run. We first adjusted the front left to 0 and adjusted it based on this.
At this point, the 676E's system volume of 60, at this volume I measured the sound pressure is 54dB, based on this as a benchmark to adjust the level of other channels.
This is the result of the final run. The first three were all 0, but I still raised the mid-range level, because many people will have problems with the vocal dialogue is too small, the ambient sound is too large, increase 2dB here, Can effectively improve this problem.
After the installation is complete, we can enjoy the shocking effect of the blockbuster, and also talk about the upgrade, Onkyo's firmware upgrade in Hong Kong official website will be much faster than the domestic official website, such as 676E in Hong Kong there is a new firmware, but no domestic, At this time, it is recommended that you use the U disk to download and upgrade. This is more reliable and stable than the online upgrade.
Finally, the icon of the panorama sound can be turned on. In the listening mode, the individual still recommends that everyone use the pass-through mode and have obtained better results.
Finally I talked about the feeling of panoramic sound. Although my basic module is 5.0.2, the effect of the panoramic sound still makes me very shocked. The effect of the sky sound channel is far from being as simple as adding two speakers. The effect of wrap around has risen from the plane to the 3D, and the effect is still quite obvious. It is worth to try. .
Now, the complete system of my living room theater has basically been put in place and has been formed. Once I am free, I will write a complete decoration report for the cinema and HIFI system. However, this estimate will have to wait until the holiday to have time to slowly organize my hands. Material and organization language.
MTB-CUT M188 Intelligent Film Cutting Machine
China Mtb-Cut M188 Intelligent Film Cutting Machine,Intelligent Film Cutting Machine,Film Cutter,Screen Protector Cutter, we offered that you can trust. Welcome to do business with us.China Mtb-Cut M188 Intelligent Film Cutting Machine,Intelligent Film Cutting Machine,Film Cutter,Screen Protector Cutter, we offered that you can trust. Welcome to do business with us.China Mtb-Cut M188 Intelligent Film Cutting Machine,Intelligent Film Cutting Machine,Film Cutter,Screen Protector Cutter, we offered that you can trust. Welcome to do business with us.China Mtb-Cut M188 Intelligent Film Cutting Machine,Intelligent Film Cutting Machine,Film Cutter,Screen Protector Cutter, we offered that you can trust. Welcome to do business with us.
Mtb-Cut M188 Intelligent Film Cutting Machine,Intelligent Film Cutting Machine,Film Cutter,Screen Protector Cutter
Mietubl Global Supply Chain (Guangzhou) Co., Ltd. , https://www.mietublmachine.com