Simple LSE airless regulator

The regulator is divided into five types: oil-immersed regulator, auto-coupled regulator, isolated regulator, inductive regulator, column-type electric regulator and thyristor regulator. The mode of operation of the regulator is divided into manual pressure regulation and electric pressure regulation.
The regulator is the 14th batch of energy-saving products for the electromechanical industry. Used in pressure regulation, temperature control, speed regulation, dimming, power control, etc., the scope of use is very wide.
The column type electric voltage regulator has the output voltage waveform without distortion (output voltage waveform distortion rate increment <1%), and the column type electric pressure regulator adopts an electric operation mechanism to reduce the labor intensity of operation. The output power can be adjusted from zero voltage, strong instantaneous overload capability, no-load current, low no-load loss, high efficiency, low noise and long life. Suitable for a variety of inductive, capacitive, resistive load use and other characteristics. Widely used in chemical, metallurgy, instrumentation, machinery manufacturing, light industry, public equipment, household appliances, etc. In contact with the regulator, the contact regulator is essentially an autotransformer whose output (terminal) voltage can be adjusted. The coil DC resistance of different capacity auto-regulators is different, but usually it is very small. 0.4 ohms cannot be used as a basis for judging whether or not it burns out.