LED light strips are common in living lighting. They can be seen everywhere in various shopping malls, restaurants, and hotels. In indoors, it can be said that almost all home lighting uses LED light strips. On the one hand, it is an indirect lighting method, and the other is The aspect is to create a very good decorative effect and create an environment. However, we can find that LED lights sometimes have uneven illumination and dim. What is the situation? How to solve it?
The LED light strip is mainly installed in the light trough to create a large-area luminous ceiling and wall surface, and the effect of washing the wall is precisely because of its large illumination range, so if there is a problem, it will affect a wide range of light and shadow effects. When choosing LED strips, we must carefully polish our eyes and carefully select them.
A good quality LED lamp bead, the brightness between the lamp bead and the lamp bead is uniform, the illumination is uniform, and the brightness of the first and last tails of the lamp is also consistent. The light color of the light strip should also be the same. Use white paper to stick to the light surface of the light strip and observe the eye directly. In order to have a uniform lighting effect, it is necessary to choose good color rendering when purchasing. The color rendering index Ra>80 is a requirement that a professional LED light strip must meet. This is also the requirement of the national standard GB50034-2013.
Incorrect installation of the light strip will also affect the lighting effect.
If the wall is not smooth, the light will be out of order, which can be solved by using the installation frame. The angle of illumination of the LED strip is usually only 120°, and some of the slots are too high, we can not see the light produced by the LED strip. In this regard, the LED lamp can be padded so that the distance between the lamp strip and the upper edge of the lamp slot is preferably about 4-125px, or the lamp strip can be attached to the side wall.
If the lamp strip is too long and the tail is not bright enough, you can use a more powerful constant voltage driver. For example, a 6-meter lamp strip can use 4A electric appliances to ensure that the appliance has enough margin without causing waste; you can also change the lamp. The connection method of the belt is used to solve the problem that the tail is not bright.
The installation of the LED light strip should be combined with different environments inside and outside, and properly installed according to the actual use, in order to ensure a good light-emitting effect and extend the service life. The use of light strips is more to create an environment and add more fun to life!
Euroblock, short for "European-style terminal block"; is a combination of a low-voltage disconnect (or pluggable) connector and terminal block commonly used for microphones and line-level audio signals , and for control signals such as RS-232 or RS-485. It is also known as the Phoenix connector and comes from a German Phoenix Electric Company, which was established in 1981 in Harrisburg, Pennsylvania, USA. Also known as "Plug-in Terminal Blocks" or "Two-Piece Terminal Blocks".
Eurostyle Terminal Blocks,Eurostyle Terminal Blocks High Temperature,Eurostyle Terminal Blocks Kit,Eurostyle Terminal Blocks Heat Resistant
Sichuan Xinlian electronic science and technology Company , https://www.sztmlchs.com