A melodious text message reminded me that I had the chance to try mystery Zhang Aunt. This was the first time
Shortly after confirming receipt of the parcel, the iconic "value" box was lighter than expected.
Open mystery Zhang Aunt's box is this time trial product - millet VR glasses (toy version), big "to explore" words is still very good, there is a millet's LOGO just above the box, marking this is still the millet ecological ring The next member
In addition to the front only information in the box focused on the lower rear, and you can see that only wrote Android, but in fact VR glasses is not system-specific, but the corresponding APP only supports Android4.4 above, iPhone or 1% What the system can use, but it is impossible to use the millet official VR APP. The supported size of 4.7-5.5 should be said to be a more suitable range. Although a larger high score screen will bring better results, due to the increase in weight and heat dissipation, 5.5 is basically a very suitable size.
Open the package and you can see the body of the glasses box a "closed" letter, in fact, is a simple emotional text, well, this is still the first batch of glasses, the bottom of the two-dimensional code is the QQ group of open beta, but it seems Can't add it
The front of the body only millet LOGO and VR full text can see the buckle is still empty, and compared with other VR glasses that require external display settings (mostly refers to the mobile phone), the biggest difference is the material, not used Common plastics, but the direct use of Lycra cotton as the main material, ductility, breathability and skin-friendly is still very good, get the feeling of the hands is not the kind of blunt sense of plastic products, it should be said that feel good, and positive The two large holes further facilitate the distribution of heat, and it is still a meaningful design for products that require the mobile phone as the main body of the display. At the same time, these two holes are generally the location of the camera and the sound system. significance. Generally speaking, it is difficult to release the mobile phone at a time, and it is also possible to adjust the position of the mobile phone through these two positions. It should be said that this design is of practical significance.
There are snaps on the top and both sides for wearing the straps. The quality of the zipper is also good. It also has the LOGO of Xiaomi, and the biggest advantage of using a zipper is that it can be compatible with the needs of different headphone jacks. This design is awkward, and it is also better than the general snap-in type or in-line type. It's much more convenient when you take out your phone. Compared with most other similar VRs, there is an independent button. This is a conductive button. Although it is just one more button, it can bring a lot of convenience to the VR experience.
The eyepieces are still covered by a protective film from the inside to the outside, and the eyepieces of the eyepieces are still translucent. However, the field of view is not very large in terms of size and distance. Now the parameters that can be seen are the official claims of the FOV. At 93 degrees, it should be said that it is indeed in line with the definition of the toy version
The following uses a motion diagram to show the inside, you can see the scissors used to mark the center of the placement, just below it is the horizontal position of the phone, the top of the eyepiece is the internal conductive button, triggered by an external button, quite The appearance of a capacitive pen. For VR applications, the movement of the mouse in the direction of the head can be achieved by turning the head. In addition to the fact that the most important is to determine the build and back button, and this capacitor button can just serve as the most important confirmation button, perhaps In the future, you may consider using the long press or double-click to retreat. The convenience brought by this single key is very large. At the same time can also see two protrusions on the side of the eyepiece, just over the highlight of some mobile phone Home entity keys, the design of these details can still be seen in good faith
Open the zipper to see a paper description, including the QR code of the Xiaomi VR APP and a simple way to use it
And this paper case even had straps. I was still looking for the straps on the box. It was really not the first thing I thought of here.
The straps also use a Lycra cotton material and have a relatively long Velcro tape, which is still quite solid. This kind of simple VR glasses is generally very recommended to tie up, free hand can use the handle and the like
The design of the straps is a typical three-line helmet, it should be said that the focus is still relatively scattered, but wearing a long time is still a bit tired. If you wear it, it's basically still very seldom shaken, but it's very painful to adjust it. Take it down and adjust it. Then try it again and repeat. The reason can be seen in the above figure. The location of the Velcro is Inside
Experimenting with my red rice Note2, the size of 5.5 is very suitable, just can leave the camera and sound system out, but I put a little embarrassing, just can be adjusted through two holes, to save the trouble to take out playback again
Trying to take a direct photo and finding out that the effect of the picture is almost nothing is good. These two pieces should be the clearest among the dozens of pictures I took, but they are still very vague and actually perform well when viewed with the naked eye.
In terms of wear, this material is as imaginary, very skin-friendly, and its own heat dissipation effect is also very good, this is an advantage, the convenience brought by keys is also very good. But I'm going to start to say something unsatisfying, and even if it's a VR entry product, I think it's a heavier problem. It's the light leakage. The light leakage from the nose is extenuating, in fact, except for the nose. Apart from sponges, there are few leaks, but only a few differences, but Xiaomi's leak is a bit large and close to the cheekbones. At the same time, there was even a noticeable leak on the outside of the eye. The sense of immersion was greatly compromised. Even politely, some Cardboard's paper shell derived versions had smaller light leaks than that, because the curvature above was too small. Or is it that people with small faces can use it even more? At least for me such a person, the forehead against the glasses, the following light leakage on the back side is great, affecting the experience
In the same way, I also took out two of my toys for comparison. The brand did not say anything. Familiar people could still see it at a glance. The three products were three very obvious design differences. The left one should be the first batch. A typical design uses a snap to hold the phone, and at the same time emphasizes a better FOV, uses a special larger eyepiece, the overall material is hard plastic, and the eye-fitting part is made of hard silicone without considering my myopia. The frame is so wide that it is completely impossible to wear glasses. The right one is the most representative lightweight VR glasses in recent years. It is light and thin, easy to carry, and the effect may be slightly poor. The overall is still mainly hard plastic, but the middle filler is sponge-based, and will not be damaged. The mobile phone will not cause great light leakage. At the same time, it also considers the need for wearing glasses and the bandage will be further enlarged to relieve the main stress points in the head. The best thing about using a sponge is almost no light leakage. Although it is already an open design, wearing a long time will still produce a lot of sweat. And Xiaomi VR has obvious evolution in skin-friendly materials, sweating experience (with any VR glasses, whether it is not a toy grade, it will be a lot of sweat, inevitable) and operation.
The other advantage of millet VR is its weight. Now most people have all kinds of heavy or light cervical diseases. The burden on the neck is also very heavy with VR. In this regard, thanks to the choice of materials, Xiaomi VR The lightest weight, it can also be seen that the development of a generation of even if the toy-level VR is also moving toward the user experience
After talking about the hardware and then talking about the software, Xiaomi relies on itself and the various video providers to have a good relationship of cooperation. It should be said that people will expect something in this aspect of the content.
After entering the APP, it is obvious that the score has become two major categories of video and games. The detailed introduction is also very similar, but the overall content is not very rich.
The video playback is quite satisfactory and meets the expected performance. The effect of the eyepiece is still very good, very transparent, and is due to the greater impact of light leakage.
The immersive operation interface needs to use the head to control the direction, to confirm, and the APP interface will also enter the virtual world of the VR-type, the overall operation is smooth, but some of the video card is more serious, feeling that CDN coverage is incomplete Looks like
Others also tried some independent VR applications or games, but most of them still do not support millet VR's independent capacitive buttons. Only the ones recommended by Xiaomi VR APP are supported. In fact, this unique capacitor button is equivalent to clicking once. The screen, but it is a pity that this has not yet become a common practice in the industry. It is a pity. The recommended VR astronomy show in APP is still worth recommending
In general, there is no sense of design detail given by the hardware in the software. At the same time, the comparison of content has occupied a lot of predecessors in many markets. The addition of buttons has brought great convenience to the overall operation, but it is a pity. Is not all applications and games support
in conclusion:
Since the launch of Google's Cardboard, China has emerged numerous VR eyewear makers, almost to the extent of brutal growth. Say something nice, it's called bamboo shoots after spring and it's hard to hear. Dog urine is almost...
A second-hand crowdfunding network used to have one-third of a page being full of VR glasses. Most of them were closed down after six months to a year or they ran out of money and money. This is also reflected in their website crowdfunding. Product above. The millet VR is basically set in the Cardboard type, most of the surviving predecessors have been transformed into integrated type (with their own screen and computing power) VR device, calmly out of a self-proclaimed "toy" VR glasses , And this device is, in my opinion, a product that has been researched very carefully. This timing tells the truth, I did not understand
However, in terms of this product, the completion of the hardware is much higher than the completion of the software, but at the same time there is also a serious problem of this light leakage, but as a VR experience or VR glasses, I think this is still Very appropriate, especially at a relatively low price (in fact, a price butcher) and relatively speaking, can basically reach the effect of similar products within 100 yuan, this millet VR glasses (toy version) is still very suitable to start playing
5 stars full marks
Weight: ★★★★★
It is light enough to compare the size
Heat dissipation: ★★★★☆
The overall material results in a good cooling effect, coupled with no fit, cooling is guaranteed...
Operation: ★★★★☆
Just one more key, the overall convenience is a lot, but unfortunately the support on the market is still small.
Light leakage: ★
It should be one of the products that I use the most leaked light now, and the other is the early cardboard...
Viewing effect: ★ ★ ☆
The effect of light leakage is relatively large, and the eyepiece itself is still very good
Game Effect: ★★★
At least horror games are not so scary, and the banding is tuned to be perfect for playing games
APP operability: ★★★★
Thanks to many more keys, it is much easier
APP content:★★
Lawful, not rich enough now, and CDN is clearly incomplete
Comfortable to wear: ★★★★★
I am very satisfied with this point, it is more comfortable to wear for a long time, but VR equipment is not absolutely comfortable
Easy to use mobile phone: ★★★★★
It's the most convenient thing in my hands. This must be emphasized.
Heat-shrinkable tubing is a special heat-shrinkable sleeve made of polyolefin. The outer layer is made of high-quality soft cross-linked polyolefin material and the inner layer of hot melt adhesive composite processing and become, the outer layer of material has the characteristics of insulation, corrosion and abrasion resistance, etc., and the inner layer has the advantages of low melting point, waterproof sealing and high adhesive properties.
Heat-shrink tube,Heat shrinkable tubing,thermal contraction pipe,Shrink tube
Mianyang Dongyao New Material Co. , https://www.mydyxc.com