Refrigerator power saving has always been a topic of concern for housewives. In the winter, the utilization rate of refrigerators is not so high, and power saving is easier. Today, Xiaobian will introduce relevant information about refrigerators. Look at the smaller the refrigerator, the more power-saving, and the power-saving methods of the refrigerator.
One: The smaller the refrigerator, the more power-saving?
1. The power consumption of the refrigerator depends not only on the volume that needs to be cooled, but also on the working efficiency of the compressor. The higher the efficiency, the smaller the power consumption.
2, Haier's compressor is the Jiaxi Bella compressor, Samsung Siemens is the Chinese compressor, not in a grade. .
3, the same volume section of course, choose the power consumption is small.
4, the refrigerator is generally the larger the volume, the greater the power consumption, the same volume should be almost right. But the brands are different, because the technical strength gap will also appear in the situation of the landlord.
Two: refrigerator power saving tips
1. Place the refrigerator according to the instructions on the instructions.
The place should be ventilated, cool and sheltered from the sun and 10cm away from the wall, so as to dissipate heat and avoid the loss of energy caused by direct sunlight.
2, reduce the number of switching of the refrigerator door
Try to take it out at once or put it in. The refrigerator is originally used for preservation and freezing, as long as it works in a closed environment. Each switch will lose the cold temperature inside.
3, temperature control refrigerator do not adjust the temperature too low
The larger the temperature control button number, the lower the temperature inside the box. In general, the temperature of the refrigerator can meet the needs of life, there is no need to adjust to a lower temperature, because the lower the temperature, the more power is consumed.
4, regular defrost
The refrigerator is prone to frost because the temperature is too low, and if the frost is too thick, the performance of the refrigerator is lowered and the power is consumed more. It is recommended to clean the frost when it is about 4-5mm.
5, the remaining meals need to be cooled before being placed in the refrigerator
Everyone knows that high temperature and low temperature are prone to generate water vapor. Water vapor condenses in the refrigerator to produce frost, and the high temperature increases the power consumption of the refrigerator.
6, try to turn off the refrigerator in winter
The role of the refrigerator in winter is not very big, then empty it and turn it off, don't forget to unplug it.
When we use the refrigerator in our lives, it is inevitable that there will be some operational errors, resulting in the cost of the refrigerator. After mastering the method of saving electricity in the refrigerator, we should pay more attention to it in daily use, which can save the electricity consumption of the refrigerator and ensure the normal service life of the refrigerator.
Diamond turning and diamond boring
Both diamond turning and diamond boring are performed with polycrystalline diamond tools.
honing
Honing is to use the oil stone (also called honing bar) inlaid on the honing head to finish the hole.
grinding
Grinding is the use of coated or pressed abrasive particles embedded in the grinding tool, through the grinding tool and workpiece in a certain pressure of the relative movement of the surface for finishing processing.
superfinishing
Ultra-finishing is the finishing of the finished surface by using fine-grained whetstone mounted on the vibrating head.
Abrasive belt grinding
Belt grinding is the grinding of workpiece surface with high-speed annular belt.
Mirror grinding
Mirror surface grinding is a grinding method to achieve the optimum surface roughness. After grinding the workpiece, the surface roughness is not more than 0.01 micron, the light is like a mirror, can be clear imaging
Precision Machining,Casting Exhaust Manifold,Stainless Stee Milling,Custom Cnc Machining Part
Tianhui Machine Co.,Ltd , https://www.thcastings.com