The smart socket that we talk about is a socket with built-in WiFi connection function, which can be remotely controlled by the mobile phone APP remotely on/off (power on/off). The size of its use and how much depends on your actual needs. In theory, as long as the mechanical switch electrical appliances can be used to control the opening and closing. So what is the role of smart socket in the end, here we analyze the introduction for everyone.
The role of smart socket
1, timing function
The smart socket timing function is very practical. For example, if you get up at 7:30 every morning, if the 7:20 water heater starts to work, there will be boiled water after getting up; every night at 11:30, the electric blanket will open on time at 11:00 and you will be warm when you go to bed... ... These regular and regular tasks can be given to smart sockets. Also, when you travel or go out of tolerance, you can also use the mobile phone APP to remotely switch the lights on and off, to create the illusion of “there is someone at home†and to prevent theft.
2, APP remote control
The smart socket can remotely control the home appliance switch through the mobile phone APP. On the way home, the air humidifier and the electric kettle can be used in advance to make the smart home feel warm.
3, electricity safety
The smart socket is provided with functions of lightning protection, anti-high voltage, anti-overload, and leakage prevention. Once there is a transient lightning induced high voltage entry, the socket will automatically absorb lightning induced high voltage, beyond the range that the socket itself can absorb, the smart socket will automatically power off; the socket set a rated voltage of 220V, the maximum withstand voltage between 250V-265V It will automatically power off, otherwise it will burn out the appliance if it exceeds this voltage range. The outlet uses electronic coils to monitor the FireWire in real time. In case of overload, the smart socket will automatically power off; the smart socket uses electronic coils on the FireWire and zero. Line current, in the event of a leakage, the outlet will automatically power off.
There are many functions of smart sockets, mainly in terms of safety and convenience, so that family life is saved and effortless. When the products are crowned with the name of “intelligenceâ€, many people think that the subconscious is very expensive. In fact, with the continuous development of science and technology , The country's strong support and promotion of environmental protection and energy-saving products, the price of smart products is getting closer to the people. In this case, choosing a smart socket is really a good choice!
related suggestion:
Article: Summarizing the Five Major Benefits of Smart Curtains
Recommended: Smart Home Implementation Plan Top 10 Smart Home Systems
The cable assembly provides the overall service equipment for a load source group, such as trunk lines, switchgear, control systems, etc.
1. The basic research content of traffic theory is to study the relationship between traffic volume, call loss and harness capacity. Therefore, cable assembly is an important basic concept in traffic theory.
2. The service object of the cable assembly is the load source, which usually refers to the user equipment; in a broad sense, the upper-level equipment is the load source of the lower-level equipment. In telephony, the load source is also called the call source, and the number of service equipment contained in the harness is called the harness capacity.
3. The standard of the cable assembly mainly depends on the calculation of its crimp rate, and the calculation of the crimp rate requires a special instrument, the cable assembly developed by Kable-X. The standard cross-section tester is the most effective tester specially designed for checking whether the cable assembly is qualified or not. Mainly through cutting, polishing, corrosion, observation, measurement. Quantities and calculations are done in several steps.
Cable assembly mainly customized products with a wide variety. It is difficult to have a unified fully automated general-purpose equipment. We welcome new equipment and new technologies, and maximize the automation level of production, so that products can be as efficient as possible on the premise of ensuring quality. And maintain the consistency and stability of the product, effectively reducing the dependence on skilled employees.
Our company's products mainly focus on the complete set of EV new energy vehicle wiring harness, energy storage wiring harness, drone wiring harness, industrial equipment wiring harness, network communication wiring harness, medical equipment wiring harness, etc.
The cable assembly industry is currently mainly Industrial Cable Assembly processing and consumer cable assembly processing. Among them, the high frequency and high speed of consumer products are more difficult to upgrade in front of industrial wire harnesses due to the faster frequency of upgrading. In fact, industrial wire harnesses Processing is also a category with very high quality control requirements. The production process requires strict and appropriate steps, material selection, process arrangement and many other details and factors that determine the quality of Wire Harness processing. Therefore, the production and processing of cable assembly, each step of the step must be highly valued and meticulous.
Custom Cable Assembly, China Cable Assembly, High Quality Cable Assembly, Customized Wire Harness Made in China
Kable-X Technology (Suzhou) Co., Ltd , https://www.kable-x-tech.com