What to pay attention to in the installation of carbon crystal wall

Carbon crystal wall heating plate adopts imported carbon crystal as heating element, which is made of high temperature and hot pressing. Its safety is not insulated flame retardant grade (94V-0), pressure resistance (3750V/min), heat conversion rate is high More than 98% is the highest "electricity-hot" conversion rate discovered so far. Its raw materials conform to ROHS standards and no harmful substances are released. It is a true safety, energy-saving, and environmentally-friendly heating product.

Installation Notes:

1. Wall positioning borehole 2, upper expansion pipe/bolt (bolt exposed wall 5mm)

3. Align the hole position with the carbon crystal plate 4, connect the wiring (sub-busbar plug), install the temperature control 5, power test test method: a. check the line is connected wrong b. check the thread head is enough to wrap c. check each piece Whether the board is hot or not D. If there is no abnormality, use the safety precautions:

1. Wall heating should be used according to the rated voltage, otherwise it will affect the life of the appliance.

2. When using wall heating, do not put your hands or body directly near the wall heating plate, let alone children close to the heating plate to avoid burns.

3, should cut off the power when not in use.

4. It is forbidden to use any object to cover the carbon crystal wall warmer.

Maintenance:

1. Do not connect the plug to the socket directly before cleaning or unassembled.

2. Keep the carbon crystal walls away from dust, fuzz, etc., and cut off the power when cleaning.

Do not attempt to open the carbon crystal wall for warm cleaning. When cleaning, wipe it dry with a rag with a cleaning agent. Do not use any abrasive or solvent-cleaning surface that will damage the surface.

Precautions:

1. This product must be reliably grounded.

2. Once the thermostat is damaged, it must be replaced by professionals.

3. Users are not allowed to dismantle and replace the internal parts of the carbon crystal wall warmer and thermostat. If there is a fault, they must contact the sales point for repair.

4. The functional structure is subject to change without prior notice. The actual product shall prevail.