Realize the tabulation function in the Auto CAD environment
Engineering and technical personnel who have used Auto CAD often need to add some tables to the engineering drawings to summarize the designed products, but there is no special tabulation software (tabulation line and form filling) in the AutoCAD environment to make tabulation The process is troublesome, and the table is not regular and beautiful. People naturally think of the famous Excel spreadsheet software, but the table produced by the software cannot be moved to AutoCAD. To this end, the author has compiled the tabulation program used in the AutoCAD environment according to the tabulation habits and some characteristics in Excel for your reference.
Second, the installation and use of the program now copy (write) named HZBX.LSP and LSTB.Lsp to a specific directory (such as: C: \ R12 \ Support or C: \ TCH \ SYS, etc.). Users can hang it under the system menu of AutoCAD or other software, call it through the menu, or call it by command.
1. Add the program call to the menu.
First find the menu source file ACAD.MNO and edit it. At the end of *** POP1 add the following:
[Draw Table Line]: ^ C ^ C ^ P (load "HZBX"); HZBX; ^ P
[Fill in the form]: ^ C ^ C ^ P ((load "LSTB"); LSTB; ^ P
Use the mouse to click the corresponding item in the activated system menu to call it.
2. Call by command.
In AutoCAD's COMMAND: state, enter (Load "HZBX") and (load "LSTB") to load the two programs, and then, with HZBX and LSTB, you can call, draw the table line and fill the form of the program. Follow the prompts to continue.
Third, the operation process 1. Draw the table line.
Note: This program provides simple table (equal spacing of each row or column) and complex table (unequal spacing of each row or column). Irregular tables can be slightly deleted on this basis.
* (1) Use the mouse to define the table.
* (2) Use horizontal and vertical spacing to define the table.
Please select (1), (2) <(1)>:
Select "(1)", then:
* Point in the lower left corner of the table:
* Click the upper right corner of the table:
* Enter the number of columns (111):
* Enter the number of lines (three):
Select "(2)", then:
* The current display area height: 34.36
* Enter the interval between each column [from left to right] (such as 120, 3 * 300, 100…}
* Enter the interval between the columns [from bottom to top] (such as 120, 3 * 300, 100…}
2. Fill in the form.
* In the font definition, the text height must be zero.
* Select the height of the text on the picture ...
* (1) [2.5mm] (2) [3.0 mm] (3) [4.0mm] (4) Custom height [4.0 mm]
If the user has not set the scale of the picture, the program automatically requests the setting.
If "(4)" is selected, then:
* Enter text high
* Define the horizontal area of ​​the table [from left to right]
* Tick the starting grid:
* Tick the stop grid:
* Define the vertical area of ​​the table [from top to bottom]:
* Tick the starting grid:
* Tick the stop grid:
* -Up / -Down / -Left / Right -C = window / -H = combination / -B = copy / -G = resize-X = set word height / -K = set word width / -J = angle / -N = Edit / -Y = Move / -R = Move / -Q = Pause / -E End existing text height: 1200.00 Enter text:
(1) If you enter "-U" and press Enter, the position bar will move up one position
(2) If you enter "-D" and press Enter, the position light bar moves down one grid
(3) If you enter "-L" and press Enter, the position bar will move one position to the left
(4) If you enter "-R" and press Enter, the position bar will move one place to the right
(5) If you enter "-C" and press Enter, then:
* Enlarge window W / shift screen N / previous window P / full picture E: if “W†is selected, then
* The first point of the window:
* Diagonal point of the window:
The last few strategies
(6) If you enter "-B" and press Enter, then:
* Click to copy text, previous text .:
* Select object:
* Tap the icon grid <End>:
Note: You can copy the selected text multiple times in succession and automatically center it.
(7) If you enter "-S" and press Enter, then:
* Tap to delete text
* Select object: Note: Multiple characters can be deleted at a time.
(8) If you enter "-G" and press Enter, then:
* The original text height or width: 800.0
* Original text content.
* Type the new character height or width of the text:
Note: Just change the height of the word in the position of the blue light bar.
(9) If you enter "-X" and press Enter, then:
* Enter the new screen height:
(10) If you enter "-K" and press Enter, then:
* Set the aspect ratio (width / hight):
(11) If you enter "-J" and press Enter, then:
* Set the angle of the word:
(12) If you enter "-N" and press Enter, then:
* Enter edit or pe2 editing software to edit the text on the blue light bar.
(13) If you enter "-R" and press Enter, then:
* Click to move the text <previous text>:
* Select object:
* Tap the target grid:
(14) If you enter "-Q" and press Enter, then:
* Tap the target grid <End>:
The light bar enters the form.
(15) If you enter "-T" and press Enter, then:
Temporarily exit the form filling state, and then click the menu, the program will overwrite the form filling definition, and the light bar will enter the starting position of the original grid.
(16) If you enter "-E" and press Enter, you will exit the form filling procedure.
Engineering and technical personnel who have used Auto CAD often need to add some tables to the engineering drawings to summarize the designed products, but there is no special tabulation software (tabulation line and form filling) in the AutoCAD environment to make tabulation The process is troublesome, and the table is not regular and beautiful. People naturally think of the famous Excel spreadsheet software, but the table produced by the software cannot be moved to AutoCAD. To this end, the author has compiled the tabulation program used in the AutoCAD environment according to the tabulation habits and some characteristics in Excel for your reference.
Second, the installation and use of the program now copy (write) named HZBX.LSP and LSTB.Lsp to a specific directory (such as: C: \ R12 \ Support or C: \ TCH \ SYS, etc.). Users can hang it under the system menu of AutoCAD or other software, call it through the menu, or call it by command.
1. Add the program call to the menu.
First find the menu source file ACAD.MNO and edit it. At the end of *** POP1 add the following:
[Draw Table Line]: ^ C ^ C ^ P (load "HZBX"); HZBX; ^ P
[Fill in the form]: ^ C ^ C ^ P ((load "LSTB"); LSTB; ^ P
Use the mouse to click the corresponding item in the activated system menu to call it.
2. Call by command.
In AutoCAD's COMMAND: state, enter (Load "HZBX") and (load "LSTB") to load the two programs, and then, with HZBX and LSTB, you can call, draw the table line and fill the form of the program. Follow the prompts to continue.
Third, the operation process 1. Draw the table line.
Note: This program provides simple table (equal spacing of each row or column) and complex table (unequal spacing of each row or column). Irregular tables can be slightly deleted on this basis.
* (1) Use the mouse to define the table.
* (2) Use horizontal and vertical spacing to define the table.
Please select (1), (2) <(1)>:
Select "(1)", then:
* Point in the lower left corner of the table:
* Click the upper right corner of the table:
* Enter the number of columns (111):
* Enter the number of lines (three):
Select "(2)", then:
* The current display area height: 34.36
* Enter the interval between each column [from left to right] (such as 120, 3 * 300, 100…}
* Enter the interval between the columns [from bottom to top] (such as 120, 3 * 300, 100…}
2. Fill in the form.
* In the font definition, the text height must be zero.
* Select the height of the text on the picture ...
* (1) [2.5mm] (2) [3.0 mm] (3) [4.0mm] (4) Custom height [4.0 mm]
If the user has not set the scale of the picture, the program automatically requests the setting.
If "(4)" is selected, then:
* Enter text high
* Define the horizontal area of ​​the table [from left to right]
* Tick the starting grid:
* Tick the stop grid:
* Define the vertical area of ​​the table [from top to bottom]:
* Tick the starting grid:
* Tick the stop grid:
* -Up / -Down / -Left / Right -C = window / -H = combination / -B = copy / -G = resize-X = set word height / -K = set word width / -J = angle / -N = Edit / -Y = Move / -R = Move / -Q = Pause / -E End existing text height: 1200.00 Enter text:
(1) If you enter "-U" and press Enter, the position bar will move up one position
(2) If you enter "-D" and press Enter, the position light bar moves down one grid
(3) If you enter "-L" and press Enter, the position bar will move one position to the left
(4) If you enter "-R" and press Enter, the position bar will move one place to the right
(5) If you enter "-C" and press Enter, then:
* Enlarge window W / shift screen N / previous window P / full picture E: if “W†is selected, then
* The first point of the window:
* Diagonal point of the window:
The last few strategies
(6) If you enter "-B" and press Enter, then:
* Click to copy text, previous text .:
* Select object:
* Tap the icon grid <End>:
Note: You can copy the selected text multiple times in succession and automatically center it.
(7) If you enter "-S" and press Enter, then:
* Tap to delete text
* Select object: Note: Multiple characters can be deleted at a time.
(8) If you enter "-G" and press Enter, then:
* The original text height or width: 800.0
* Original text content.
* Type the new character height or width of the text:
Note: Just change the height of the word in the position of the blue light bar.
(9) If you enter "-X" and press Enter, then:
* Enter the new screen height:
(10) If you enter "-K" and press Enter, then:
* Set the aspect ratio (width / hight):
(11) If you enter "-J" and press Enter, then:
* Set the angle of the word:
(12) If you enter "-N" and press Enter, then:
* Enter edit or pe2 editing software to edit the text on the blue light bar.
(13) If you enter "-R" and press Enter, then:
* Click to move the text <previous text>:
* Select object:
* Tap the target grid:
(14) If you enter "-Q" and press Enter, then:
* Tap the target grid <End>:
The light bar enters the form.
(15) If you enter "-T" and press Enter, then:
Temporarily exit the form filling state, and then click the menu, the program will overwrite the form filling definition, and the light bar will enter the starting position of the original grid.
(16) If you enter "-E" and press Enter, you will exit the form filling procedure.
Desktop style 12v and 24v series can be used in many different electronics. EMC, LVD, FCC, RoHS are available in our company. OEM and ODM are available, samples are free for testing, all our products have 2 years warranty.
Our products built with input/output overvoltage protection, input/output overcurrent protection, over temperature protection, over power protection and short circuit protection. You can send more details of this product, so that we can offer best service to you!
Led Adapter, Lcd Adapter,Speaker Power Adapter,Lcd Power Supply
Shenzhen Waweis Technology Co., Ltd. , https://www.waweisasdapter.com