Corrugated Steel Cable Drums for Wire Cable Rope

Model NO.: TYC
Trademark: ONEREEL
Origin: Ningbo China
Model NO.: TYC
Trademark: ONEREEL
Origin: Ningbo China
Corrugated reel is manufactured in accordance with GB4004-83, JB/T7600.3-94
and DlN46395 standards. Its common carbon steel Q235 thin steel plate punched
into corrugated type serves as the lateral plate; And its mandrel and major body
are supported by four-groove reinforcing steel bars.
The product has the characteristics of not only strengthening the strength of bobbin,
but also having light weight of bobbin, which can be used for buncher, stranding
machine, extruder, cabling machine and armouring machine.
 
Serial Number Specification Model Lateral Plate Diameter D1 Major Diameter D2 Axle Hole Diameter D4 Carrying Hole Diameter D5 Center Distance E of Axle Hole and Carrying Hole External Width L1 Internal Width L2
1 800 800 400 80 40 160 600 500
2 1000 1000 500 80 40 160 750 630
3 1120 1120 560 80 40 160 850 710
4 1250 1250 630 80 40 160 950 800
5 1400 1400 710 80 65 300 1060 900
6 1600 1600 800 80 65 300 1180 1000
7 1800 1800 1000 100 65 300 1320 1120
8 2000 2000 1120 1235 65 300 1500 1250
9 2240 2240 1250 125 65 300 1700 1400
10 2500 2500 1500 125 65 300 1900 1600
11 2800 2800 1800 140 65 300 2120 1800
12 3150 3150 2000 160 65 500 2300 2000
13 4000 4000 2800 200 80 500 2300 2000






 
  Corrugated reel is manufactured in accordance with GB4004-83, JB/T7600.3-94
and DlN46395 standards. Its common carbon steel Q235 thin steel plate punched
into corrugated type serves as the lateral plate; And its mandrel and major body
are supported by four-groove reinforcing steel bars.
The product has the characteristics of not only strengthening the strength of bobbin,
but also having light weight of bobbin, which can be used for buncher, stranding
machine, extruder, cabling machine and armouring machine.
 
Serial Number Specification Model Lateral Plate Diameter D1 Major Diameter D2 Axle Hole Diameter D4 Carrying Hole Diameter D5 Center Distance E of Axle Hole and Carrying Hole External Width L1 Internal Width L2
1 800 800 400 80 40 160 600 500
2 1000 1000 500 80 40 160 750 630
3 1120 1120 560 80 40 160 850 710
4 1250 1250 630 80 40 160 950 800
5 1400 1400 710 80 65 300 1060 900
6 1600 1600 800 80 65 300 1180 1000
7 1800 1800 1000 100 65 300 1320 1120
8 2000 2000 1120 1235 65 300 1500 1250
9 2240 2240 1250 125 65 300 1700 1400
10 2500 2500 1500 125 65 300 1900 1600
11 2800 2800 1800 140 65 300 2120 1800
12 3150 3150 2000 160 65 500 2300 2000
13 4000 4000 2800 200 80 500 2300 2000






 
 

Fiber Optic Patch Panel(ODF)

Fiber optic patch panel is now widely used in networks and it is an integrated unit for fiber management, we are offering various kinds of Fiber Optic Patch Panel, such as wall mounted fiber optic patch panel, rack mounted fiber optic patch panels. These equipment functions to fix and manage the fiber optic cables inside the box as well as provide protection.
Our wall mounted fiber patch panels accommodate up to 8 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control. The 16-gauge steel with corrosion-resistant black powder finish coat housing provides excellent protection for the inside fibers. Wall-mount available unloaded, as well as having the capability to become a full-splice enclosure with mechanical terminations. A large variety of connector adapters are offered to meet your specific requirements. Such as SC, FC, ST, LC, etc, we can also pre-install various kinds of fiber optic pigtails inside the patch panel.

YLTelecom offers a series of changeable inside panels to fit for different kinds of the adaptor interface, and fit for both round and ribbon fiber optic cables. Our rack mounted fiber patch panels can be drawer type or economic type without draw design.



A Fiber-Optic Patch Panel is used to separate out the fibers within a fiber-optic cable. By using one of these panels, the fibers can be spliced to individual fibers on other cables, allowing the cables to be crossed and connected in a variety of ways. In addition, the panel creates a safe environment in which to work with exposed fibers.

There are two main types of Fiber-Optic Enclosures. One is a wall-mounted device, which, in its most basic form, can keep 12 different fibers separate from one another. If the fiber-optic cable has more than 12 fibers, the extra fibers can be moved to a second panel or an engineer can use a panel that is designed to hold more fibers separately. Wall-mounted panels can be constructed to hold up to 144 fibers at once.

The other type of Fiber-Optic Patch Panel is a Rack-Mounted Panel. This type of panel holds the fibers horizontally and is often designed to open like a drawer. Sliding the panel open gives an optical engineer easy access to the fibers inside.


Fiber Patch Panel, Fiber Optic Patch Panel, Optical Patch Panel, Outdoor Fiber Optic Patch Panel, Optical Distribution Frame

NINGBO YULIANG TELECOM MUNICATIONS EQUIPMENT CO.,LTD. , https://www.yltelecom.com