Today, I will talk about the new car BYD dynasty. Some people say that Yan value Bo has to stand by, then we will take a look at this car. BYD has done very well in the field of new energy! And it is also top-notch in its own brand, and its Tang-100-kilometer acceleration takes only 5 seconds. Moreover, in the 2015 and 2016 years, the sales champion in the global new energy vehicle series is BYD, but it is undeniable that BYD's design has always been a bad point, and there is BYD's logo, how many years of black pot! There are many people who ridicule BYD for being a designer.
The front face of the BYD dynasty incorporates the elements of the Chinese dragon, and the front face style is quite different from the previous models. The front face headlights have an open-eye treatment, combined with a double vertical daytime driving, reflecting the majesty of the eyes like a dragon. The large mouth air intake grille has a matrix design inside and the visual impact is quite good. Viewed from the side of the body, the BYD Dynasty adopted a suspended roof design. With a straight waistline and multiple rims, the visual effect is equally outstanding. The penetrating taillight design is also a highlight, which gives the rear end a lot of technological sense. Combined with the front face, the appearance of the whole car can be described as quite amazing. The car logo that seems to have been spit out seems to be pleasing to the eye in this car.
Since the addition of Audi designer Wolfgang Eiger, BYD's appearance is really exquisite and fashionable, but the appearance is somewhat Audi. It should be the arrival of Iger, then we have to see if BYD can pick this. The ugly hat, let us wait and see! The appearance has earned enough attention, and the interior has also kept up. The most absorbing gold is the large LCD screen in the control, which is the same as Tesla! In terms of power, the BYD Dynasty is expected to be equipped with a 2.0T engine + motor to form a hybrid system, and the total output power should be 500. Acceleration; 100 km acceleration should also be within 5 seconds, more violent than the current Tang! Overall, the new car's power performance is very good.
BYD's car made in the past few years does not say anything else. It just says that the appearance is really not strong. This leads to the black mark of the original car logo, and then the appearance is not strong, and then the person who sprays is more, now the sales volume is As the situation worsens, it is better to have a new energy vehicle market. Otherwise, BYD’s current sales volume is indeed very slim. However, BYD is now finally recognizing its own shortcomings. At the end of last year, it took a high price to hire Audi's designers to give BYD a design. The Audi designer is also worth the money, very powerful, BYD. BYD Song MPV, which was created by Audi designers this year, is a big show at the Shanghai Auto Show.
Through the poor sales in recent years, I think the BYD executives have already realized this problem. So BYD did not hesitate to spend a lot of money to hire foreign designers. Hired Audi's design director and hired Mercedes-Benz's excellent site design director Hans. Therefore, the car model value designed by BYD recently is simply a beautiful explosion. Recently, some domestic media released a set of road test spy photos of the new generation BYD Tang models, which is roughly the same as the design style of the previously released Dynasty concept car, and is expected to be unveiled during the year.
The front face of the new car is based on the latest front face design of the BYD family. It is the same as the front face of the seven dynasties of BYD and the seven-story version of Song. So the entire front face design is stylish and very young. The front air intake grille is designed in a "big mouth form". At the same time, the multi-banner chrome strip decoration makes the front face look more atmospheric. The shape of the willow-browed headlights has become even better.
The first model of the dynasty was named BYD Song. He was born in the hands of former Audi designers. The overall shape is very different from other models in the family. The front face of the bottle is very strong. The horizontal chrome trim also has some meaning of Audi. The traversing headlights are equipped with lenses for a very good visual experience. From the front face design sense, BYD has grown. The design of the rear of the car is also quite different from that of other models in the family. The chrome trim strips across the rear of the car are equipped with rear taillights. The design of the entire rear is round and full, and the originality is very high. More innovative, the lower bumper is decorated with silver plaque, which inadvertently enhances the texture of the car.
Fiber Optic Patch Panel(ODF)
Fiber optic patch panel is now widely used in networks and it is an integrated unit for fiber management, we are offering various kinds of Fiber Optic Patch Panel, such as wall mounted fiber optic patch panel, rack mounted fiber optic patch panels. These equipment functions to fix and manage the fiber optic cables inside the box as well as provide protection.
Our wall mounted fiber patch panels accommodate up to 8 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control. The 16-gauge steel with corrosion-resistant black powder finish coat housing provides excellent protection for the inside fibers. Wall-mount available unloaded, as well as having the capability to become a full-splice enclosure with mechanical terminations. A large variety of connector adapters are offered to meet your specific requirements. Such as SC, FC, ST, LC, etc, we can also pre-install various kinds of fiber optic pigtails inside the patch panel.
YLTelecom offers a series of changeable inside panels to fit for different kinds of the adaptor interface, and fit for both round and ribbon fiber optic cables. Our rack mounted fiber patch panels can be drawer type or economic type without draw design.
A Fiber-Optic Patch Panel is used to separate out the fibers within a fiber-optic cable. By using one of these panels, the fibers can be spliced to individual fibers on other cables, allowing the cables to be crossed and connected in a variety of ways. In addition, the panel creates a safe environment in which to work with exposed fibers.
There are two main types of Fiber-Optic Enclosures. One is a wall-mounted device, which, in its most basic form, can keep 12 different fibers separate from one another. If the fiber-optic cable has more than 12 fibers, the extra fibers can be moved to a second panel or an engineer can use a panel that is designed to hold more fibers separately. Wall-mounted panels can be constructed to hold up to 144 fibers at once.
The other type of Fiber-Optic Patch Panel is a Rack-Mounted Panel. This type of panel holds the fibers horizontally and is often designed to open like a drawer. Sliding the panel open gives an optical engineer easy access to the fibers inside.
Fiber Patch Panel, Fiber Optic Patch Panel, Optical Patch Panel, Outdoor Fiber Optic Patch Panel, Optical Distribution Frame
NINGBO YULIANG TELECOM MUNICATIONS EQUIPMENT CO.,LTD. , https://www.yltelecom.com